[ICOM] IC-756pro RX ANT switching

[Adam Farson]

Hi Dave,

1/R and 2/R switch the receive RF signal path from ANT1 or ANT2 to the
RX-ANT input. If the input is still "a wee bit deef" (like auld Mrs.
McGregor), the RF fuse DS111 (Part No.HRS-4160A) on the RF UNIT board may
have gone open. (IC-756Pro Service Manual, p. 10-8).

You can download the IC-756Pro service manual from Marcucci, mods.dk or
http://www.qsl.net/icom/

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Dave G4GED
Sent: 15 January 2006 00:20
To: ICOM Reflector
Subject: [ICOM] IC-756pro RX ANT switching

Hi all
Wonder if  someone could tell me how to switch to receive from the RX ANT
port?
I've been thro' the manual 2 or 3 times and cannot find a proper instruction
for this.
The antenna function switch toggles 1, 2, and if held down 1/R and 2/R but
neither of these activate the RX ANT port?

Many tnx in advanced
 73 Dave



Scanned for viruses by Blue Coat
http://www.WinProxy.com/