[ICOM] Low TX Audio on ICOM IC-208H

[Rob Gallagher]

Interesting as their data sheet indicates +/- 5kHz.

Did they claim to adjust the deviation if you sent it in?

TIA,

Rob W3RG

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Lists
Sent: Saturday, January 14, 2006 7:15 PM
To: ICOM Reflector
Subject: RE: [ICOM] Low TX Audio on ICOM IC-208H


Rob,

Forget it, Icom sets the deviation at about +/-3.5 Khz. The only way
to adjust it to the proper +/- 5 Khz is to send it in to Icom.
Adjustment is made through software and you can not purchase it. I
gave up on the whole thing, using it as is until it quits working. It
will then go into the trash can and I will buy another brand of radio.
Icom does not care so don't bother calling them about it. I already
did battle with them.

K9GPS



-----Original Message-----
Subject: [ICOM] Low TX Audio on ICOM IC-208H

I have set the Mic Sens. to H and Narrow TX to OFF and still am told
that the audio is way down.  Any suggestions to try?

Tnx,

Rob

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/