[ICOM] PIEXX

[Gil Kellersman]

Card is SIMPLE to install and everything works right
away just as advertised.

--- Ken Winterling <wa2lbi at frontiernet.net> wrote:

> Why not go directly to PIEXX?  The modules are $59. 
> Here is the URL:
>
http://www.piexx.com/index.php?main_page=product_info&products_id=26
> 
> Usual no connection disclaimer...
> 
> Ken, WA2LBI
> 
> On 2/22/06, Jan Robbins <swanman at cfu.net> wrote:
> > I think you can do it via PDA here--
> >
> > http://www.hosenose.com/
> >
> > If
> > that doesn't work, inquiry of Scott at MTS, here--
> >
> > http://www.angelfire.com/biz2/mts/
> >
> > GL es vy 73!  Jan N0JR
> >
> >
> > C Whitaker wrote:
> >
> > >  de WB2CPN   South Central Pennsylvania 
> 2006.02.22
> > >
> > > Anyone know where I can get a PIEXX board for my
> 751A?
> > > The 751A hasn't died yet, but the 751 did, and
> that's where
> > > my only PIEXX board just went.  Jim, Adam and
> Rick:  The
> > > PIEXX board works, but I set all the memories to
> something
> > > other than Zero.  Less confusion.  Tnx
> > >
> > > Also, has anyone successfully cleaned the RF PWR
> control
> > > resistor on the 751?  Maybe I can get some "TV
> Tuner Cleaner"
> > > in there, but it's a close fit.    Tnx Agn
> > >
> > > 73  Clete
> > >
> > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > >
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>