[ICOM] ICOM IC 775 - How to Convert to all band TX?

[Greg Mijal]

Thanks Cliff:

I got the website for the mod. You're right it is W1.
Appreciate your help sir
Greg
WA7LYO
in sunny Feenix
----- Original Message ----- 
From: "Clif Holland" <radio.service at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, February 12, 2006 2:52 PM
Subject: Re: [ICOM] ICOM IC 775 - How to Convert to all band TX?


> On the logic board remove chip jumper W1.
>
> Clif Holland KA5IPF
> www.avvid.com
>
>
> ----- Original Message ----- 
> From: "Greg Mijal" <bluebirdtele at earthlink.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Sunday, February 12, 2006 2:35 PM
> Subject: [ICOM] ICOM IC 775 - How to Convert to all band TX?
>
>
> A good friend of mine with poor eyesight wants me to convert his IC 775 to
> all band transmit in order to get his machine onto the Army MARS
> frequencies.
> Does anyone have the info? I have the service manual and should be able to
> follow your instructions without problems.
> Thanks!
> Greg
> WA7LYO
> in sunny Feenix
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/