[ICOM] Overload, 756 PRO III (Was Comments on 746pro)

[ZL2AAA]

Perhaps one should think of the old diode effect ie those old corroded non
soldered joints in an adjacent ant or even the ant in use also the rain
spouting and loose or rusty iron on the roof .Wire fences are also a known
source of his problem.Morrie


----- Original Message ----- 
From: "David J. Ring, Jr." <n1ea at arrl.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, February 07, 2006 6:00 PM
Subject: Re: [ICOM] Overload, 756 PRO III (Was Comments on 746pro)


Using my IC756PRO I heard one W4 on 3700 kHz area - he was actually on 160
around 1830 or so.  I tuned up on 160 and told him about it, but I heard no
others leaking through.

73

David N1EA

----- Original Message ----- 
From: "W7RY" <w7ry at centurytel.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Monday, February 06, 2006 11:30 PM
Subject: [ICOM] Overload, 756 PRO III (Was Comments on 746pro)


I too noticed images on my NEW pro III on 160 meters during the CQWW CW
contest. Needless to say, I was very disappointed to here them on a rig
I just paid $3000.00 for.

According to Adams web site, the 756 pro III is better than anything
else!

Hmmmmm....


73
Jim W7RY




-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Bob Garrett
Sent: Sunday, February 05, 2006 8:06 PM
To: ICOM Reflector
Subject: Re: [ICOM] Comments on 746pro

Gary et al,

I purchased the 746PRO in November of 2004, my first Icom rig.  I then
purchased the 756PROIII in March of 2005.  I really liked the 746PRO and

thought hmmm, if the 746PRO is good, the PROIII has to be significantly
better.  Yes, the RX is quieter but, for the investment, the 746PRO is a

better value.  I find both suffer from phantom signals.

Let me quickly add that about 95% of my operating is on 160 meters
chasing
DX where you have 20 over S9 signals and you are trying to dig out a S4
signal close by.  The only rig I have found to date that is pretty much
bullet proof under those conditions is my FT-1000MP Field with the Inrad

roofing filter.   I do switch between all three rigs frequently and each
has
its strong and weak points.

Just one mans opinion.

73, Bob K3UL

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.0.375 / Virus Database: 267.15.2/251 - Release Date: 2/4/2006


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/