[ICOM] 775 will not xmit

[Hans Remeeus]

About 2 hours it will take, yes. Actually it depends if you remove the 
RF-board, which IMHO is not necessary.

I found it quite easy to solder the three wires onto the ribbon 
connector, while keeping the RF-board on its place.

The only thing you have to do first, is to disconnect the ribbon cable 
from it's socket at both sides (from the RF-board and from the IF-board).

This saves you time and less risk on failures.

It is shown on 
http://www.remeeus.nl/english/hamradio/roofing%20filter%20775%20026.jpg


73,
Hans Remeeus (PA1HR)
http://www.remeeus.nl
Communication is about people, the rest is technology.



Art Sellers schreef:
> Sorry Vladimir it take about 2 hours. this is from pulling the rig from 
> the shelf to putting it back.  Now that if done it ( expert) it could be 
> done in 1.5 hours.  hi hi hi.  Hans Remeeus ( PA1HR ) has it down pat 
> follow it and you will not go wrong. I'm retired so time too important.
> 73's
> Art W3TZ
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>