[ICOM] Special Lubricants (Formerly about IC765 Tuning Knob, etc.)

[gclute at comcast.net]

Great information LW...I'll pick up a can next trip to Lowes/Home Depot.

The power line noise at the beach subsided last night and I heard you and the guys about 2300 hours or so.

You had some funny stuff, and too bad Archie didn't appreciate the subtle humor.

I heard you repaired your FT900 ....good work.

Stay well...best regards,

George W7LFD
 -------------- Original message ----------------------
From: "Charles L. Word" <larri at comcast.net>
> Hi Everyone,
> 
> Everyone is telling you what not use.   WD-40. With little no
> recommendations.  Hi Hi
> 
> Try Using " Tri-Flow "Lubricant with Teflon.  It's a very light superior
> lubricant.  Made by the Sherwin-Williams Company..
> 
> Can be found in all hardware stores (OSH In California) in the lub section.
> Can be found in most bicycle shops, Lowes, and Home Depot..
> 
> I have used this Lub for over 10 years.  This Teflon Lub works wonders on
> bearings of all type.  Wouldn't be without a bottle in the shack.
> 
> Good Luck....
> 
> Larry W4UAT
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]On
> Behalf Of C Whitaker
> Sent: Tuesday, December 05, 2006 5:56 AM
> To: ICOM Reflector
> Subject: Re: [ICOM] Special Lubricants (Formerly about IC765 Tuning Knob,
> etc.)
> 
> de WB2CPN
> Or try a fishing reel store.  Gander Mountain has
> a little "Precision Oiler" that works well.  I use
> WD-40 on all my shovels and some tools as a
> protective.  It's OK there.
> 73  Clete
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/