[ICOM] Special Lubricants (Formerly about IC765 Tuning Knob, etc.)

[Charles L. Word]

Hi Everyone,

Everyone is telling you what not use.   WD-40. With little no
recommendations.  Hi Hi

Try Using " Tri-Flow "Lubricant with Teflon.  It's a very light superior
lubricant.  Made by the Sherwin-Williams Company..

Can be found in all hardware stores (OSH In California) in the lub section.
Can be found in most bicycle shops, Lowes, and Home Depot..

I have used this Lub for over 10 years.  This Teflon Lub works wonders on
bearings of all type.  Wouldn't be without a bottle in the shack.

Good Luck....

Larry W4UAT

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]On
Behalf Of C Whitaker
Sent: Tuesday, December 05, 2006 5:56 AM
To: ICOM Reflector
Subject: Re: [ICOM] Special Lubricants (Formerly about IC765 Tuning Knob,
etc.)

de WB2CPN
Or try a fishing reel store.  Gander Mountain has
a little "Precision Oiler" that works well.  I use
WD-40 on all my shovels and some tools as a
protective.  It's OK there.
73  Clete



----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/