[ICOM] IC-775 RX antenna

[AD5VJ Bob]

Hi fellows:

I have an IC-775 es am wanting to know if anyone has made a RX antenna switch for theirs or knows how to do so. 

The rig has a jumper in the back (#2 on page 11 in the manual) right next to the transverter socket, which looks like it might
accommodate something like this. But it doesn't really say much about it.

The manual on page 11 says: "RECEIVE ANTENNA JACKS [RX ANT IN]/[RX ANT OUT] (p.15)
Located between the transmit/receive switching circuit and receiver's RF stage. Connect an external preamp or RF filter, if
desired."

So you go to pg 15 and all it shows is the jumper cable connected

I am not wanting an external preamp or RF filter, but would like to have a receive only antenna for 160 especially.

  73 fer nw es gud DX,
QSL VIA: BUR, LotW, e-QSL
Bob AD5VJ(AAR6VM)
Old calls: WY5L/KH3-KE5CTY-N5IET
http://www.ad5vj.com/

Member: CTDXCC, NTCC, STXDXCC
FISTS: # 12637, SKCC# 2369
10X# 37210, FP#-1141
SMIRK#-5177, RARS #-149