[ICOM] IC-7000 AM Modulation Problem

[Chris BONDE]

I am not sure what is obvious.

I think that more Canadians run lower power than Americans (of the US type).

However, what power that one operator runs and what results that operator obtains 
is difficult to ascertain,

Most of the operators that I know of run barefoot.  There are very few who run top 
power.

Chris opr VE7HCB

> Adam,
> 
> Obviously the Canadians run more SSB power 2.25 kW output to make it
> just as reliable as their legal 750 W Morse CW output.  What a
> difference!
> 
> 73
> David N1EA
> 
> ----- Original Message ----- 
> From: "Adam Farson" <farson at shaw.ca>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Wednesday, April 05, 2006 2:17 PM
> Subject: RE: [ICOM] IC-7000 AM Modulation Problem
> 
> 
> Hi Dave,
> 
> Canada is somewhat more generous in this respect. Industry Canada
> regulations allow Advanced licensees 2.25kW PEP output (SSB), and 1kW
> DC input to the final (or 750W carrier output)  for all other modes.
> 
> The other side of the coin is that transmitted occupied bandwidth is
> limited to 6 kHz per channel (at -26 dBc) on all HF bands except 30m
> (1 kHz) and 10m (20 kHz). So "high-figh" AM ops are limited to 10m.
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> 
> 
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.0.385 / Virus Database: 268.3.5/301 - Release Date:
> 4/4/2006
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/