[ICOM] ICOM 756 PRO 3 Signal level changes

[W7RY]

I did nothing of the sort. Please review the email chain. What I did say
was....

"If you remove the antenna, and the signal is still there, it's a
birdie".


This is what happens when someone jumps in and makes a comment and does
not sign their email. It results in a lot of finger pointing!!

When someone replies, PLEASE sign your E-Mail!!!!!

73
Jim W7RY


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Tom Norris
Sent: Saturday, September 24, 2005 6:23 PM
To: ICOM Reflector
Subject: Re: [ICOM] ICOM 756 PRO 3 Signal level changes

Nope, you just said "no it isn't" and nothing else. I wasn't being  
smart with my remark, and I apologize if it sounded that way.

But, yea that freq can be a problem depending on location and how  
many electronic things in the house use 3.58 as the clock freq.  Out  
here in the country there isn't much of a problem, but you can tell  
when going mobile where the clusters of civilization are as signal  
levels on that freq tend to go up.

Again, I apologize, Jim

73

Tom NU4G

On Sep 24, 2005, at 7:22 PM, W7RY wrote:

> I could have told who what what is?
>
> Are you accusing me of something Tom?
>
> Jim W7RY
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom- 
> bounces at mailman.qth.net]
> On Behalf Of Tom Norris
> Sent: Saturday, September 24, 2005 12:23 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] ICOM 756 PRO 3 Signal level changes
>
> Jim, you could have told him what it was.
>
> Bill, that frequency is 4x the common colorburst frequency
> of 3.58~ TV's use that freq, tons of consumer devices use
> that freq and it's a popular 80 meter CW freq.
>
> As to the other thing? You just changed "bands" and the
> tuner is changing to another preset. It's normal.
>
> 73
>
> Tom NU4G
>
>
> On Sep 24, 2005, at 1:43 PM, Jim wrote:
>
>
>> THATS NOT A BIRDIE
>>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net [mailto:icom-
>> bounces at mailman.qth.net] On
>> Behalf Of Bill Maynard
>>
>> Subject: [ICOM] ICOM 756 PRO 3 Signal level changes
>>
>> I have a Icom 756 Pro 3 that changes signal level downward, exactly
>> at 14.300.  At this point I also see the tuner light blink. In
>> addition, I have a "birdie at 14.315 - 14.317. Any suggestions to
>> solve would be appreciated.
>>
>> Bill Maynard  W5VCI
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/