[ICOM] ICOM 756 PRO 3 Signal level changes

[D C *Mac* Macdonald]

Then why in heck was it chosen for the Icom on-air net??

Mac, K2GKK/5


----Original Message Follows----
From: "W7RY" <w7ry at centurytel.net>
Reply-To: ICOM Reflector <icom at mailman.qth.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Subject: RE: [ICOM] ICOM 756 PRO 3 Signal level changes
Date: Sat, 24 Sep 2005 14:57:55 -0700

Bill W5VCI-

If you remove the antenna, and you still hear it? It's a birdie....
Does it go away when you remove the antenna?

Please let us know.


73 Jim W7RY


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Tom Norris
Sent: Saturday, September 24, 2005 12:23 PM
To: ICOM Reflector
Subject: Re: [ICOM] ICOM 756 PRO 3 Signal level changes

Jim, you could have told him what it was.

Bill, that frequency is 4x the common colorburst frequency
of 3.58~ TV's use that freq, tons of consumer devices use
that freq and it's a popular 80 meter CW freq.

As to the other thing? You just changed "bands" and the
tuner is changing to another preset. It's normal.

73

Tom NU4G


On Sep 24, 2005, at 1:43 PM, Jim wrote:

 > THATS NOT A BIRDIE
 >
 > -----Original Message-----
 > From: icom-bounces at mailman.qth.net [mailto:icom-
 > bounces at mailman.qth.net] On
 > Behalf Of Bill Maynard
 >
 > Subject: [ICOM] ICOM 756 PRO 3 Signal level changes
 >
 > I have a Icom 756 Pro 3 that changes signal level downward, exactly
 > at 14.300.  At this point I also see the tuner light blink. In
 > addition, I have a "birdie at 14.315 - 14.317. Any suggestions to
 > solve would be appreciated.
 >
 > Bill Maynard  W5VCI

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/