[ICOM] 756 pro II goes to max power on 6m

[Richard Hicks]

Thanks Steven, John, and Paul,

Looks like the Mods DK 6m Oscillation describes my problem exactly.

73 Dick

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of paul at w8aef.com
Sent: Saturday, September 10, 2005 05:04
To: ICOM Reflector
Subject: Re: [ICOM] 756 pro II goes to max power on 6m


It is there and it is effective.

de Paul, W8AEF

----- Original Message ----- 
From: "Steven Moore" <scm at copper.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, September 10, 2005 4:49 AM
Subject: Re: [ICOM] 756 pro II goes to max power on 6m


>I think [not for sure] there is a mod on modsdk that talks about 6m
>oscillation.
> 73
> Steve  wd0ct
>
> ----- Original Message -----
>> From: "Richard Hicks" <K4UTE at comcast.net>
>> To: "Icom" <icom at mailman.qth.net>
>> Sent: Saturday, September 10, 2005 1:44 AM
>> Subject: [ICOM] 756 pro II goes to max power on 6m
>>
>>
>>> Recently my ProII started going to max power out on 6M ONLY when the

>>> ptt is keyed. This happens in all modes regardless of the position 
>>> of the rf power control. I have
>>> verified the that the swr on antenna is 1.2.  If I engage the tuner
the
>>> radio operates
>>> normal in rtty/cw but will still peg power out in ssb regardless of
rf
>>> power control.
>>>
>>> I have borrowed a friends Pro II and connected everything the same 
>>> and it works properly.
>>>
>>> Any help in troubleshooting this will be appreciated.
>>>
>>> Dick K4UTE
> 

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/