[ICOM] VL-1000 Quadra

[Gil Kellersman]

Hi Adam:

Since you know Icom's well I need your advise. I have
a 751A that has lost lower sideband and am on transmit
and receive. Upper SSB transmits and receives fine. I
live in Shelton, CT. Can you suggest the best place to
take my radio OR send it to be fixed. I need someone
that works on ICOM regularly BUT will be fair and
reasonable on what they charge me to fix it. Thanks in
advance, Gil K1RRR

--- Adam Farson <farson at shaw.ca> wrote:

> Hi Doug,
> 
> Thanks for letting me know - that is what I had
> suspected. I have sent you
> the 10/12m enabling procedure under separate cover.
> 
> The Quadra will work well with an Icom exciter. You
> will need to make up an
> interface cable to allow the amplifier to key the
> exciter.
> 
> http://www.qsl.net/ab4oj/quadra/interface.html 
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Doug
> Sent: 18 October 2005 18:53
> To: ICOM Reflector
> Subject: RE: [ICOM] VL-1000 Quadra
> 
> Adam,
> 
> The amp was supposed to be set up with 10/12m
> enabled before it was shipped
> to me.  Between my email and your reply I came to
> the same conclusion that
> this had not been done.  Thanks.
> 
> Doug
> 
> 
> 
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>