[ICOM] IC-2710H VHF Output Power ?

[Rob]

Thanks Adam.

I did try that URL but I keep getting an error message......

Rob

----- Original Message -----
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Sunday, October 09, 2005 7:47 PM
Subject: RE: [ICOM] IC-2710H VHF Output Power ?


> Hi Rob,
>
> You can download the IC-2710 service manual here (30 MB):
>
> http://www.marcucci.it/english/download/
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On
> Behalf Of Rob Gallagher
> Sent: 09 October 2005 13:21
> To: ICOM Reflector
> Subject: [ICOM] IC-2710H VHF Output Power ?
>
> I just got an almost new condition IC-2710H.  Output on UHF is right where
> it should be. However,  The VHF side is only at 25 watts.  All the power
> setting appear low for the VHF side.  Using the internal POT to turn it up
> does not provide any change other then being able to turn it down further.
>
> I would think it might be the power output module but the failures I have
> see with those tend to be sub-1watt type of output.
>
> I don't have a copy of the service manual.  Any input is greatly
> appreciated.
>
> Rob- W3RG
>
> BTW, I did get two of these units the other one works as it should.
>
>
>
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/