[ICOM] Icom 765 Problem

[paul at w8aef.com]

Or I may have posted the information way back when.  Try searching the 
archives.

de Paul, W8AEF

----- Original Message ----- 
From: <paul at w8aef.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, October 08, 2005 6:03 PM
Subject: Re: [ICOM] Icom 765 Problem


> It's been too many years.
>
> I seem to remember they were along the left side of the board as I looked 
> at it, near the outside of the radio, and fastened to a common heat sink.
>
> If you can locate them, just try tapping on each one and see if you hear 
> your noise.
>
> de Paul, W8AEF
>
> ----- Original Message ----- 
> From: "Bruce J. Howes" <bhowes at suscom-maine.net>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Saturday, October 08, 2005 5:16 PM
> Subject: RE: [ICOM] Icom 765 Problem
>
>
>> Hi Paul,
>>
>> Do you recall which transistors in question, Icom schematic numbers?
>> Appears that they are located on the main board, right?
>> Was it a process to correct, did you need to remove the main board?
>>
>> Tnx - Bruce W1UJR
>