[ICOM] 706MkIIG VHF Xmit Problem.

[Gary V. Smith]

Thanks Larry.  I should have mentioned in my original post that the 
power supply is 35 amps.  It has never shown to be sensitive to 2m RF 
before, but your suggestion is sure worth a try. Per your suggestion 
I'll try it on another power supply and into a dummy load.

It may be worth mentioning that since I wrote the original post I 
tried the rig on a third 2m antenna.  Same results as with the other two.

73,
Gary - W6GVS
Dowagiac, MI

At 06:06 PM 11/29/2005, you wrote:
>The power supply you are using could be sensitive to and getting 2 
>meter RF into it. Does the radio work OK on 2 into a 50 Ohm dummy 
>load? Larry K4LXV
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/