[ICOM] ICOM HM-56 Mic. Stuck on Xmit

[jim fox]

Kent,
    I have been fighting the same problem here.. If you don't mind, I would 
like a schematic also..
My email is w0hfg at st-tel.net . Tnx  Jim /W0hfg


>From: Paul Erickson <va7nt at telus.net>
>Reply-To: ICOM Reflector <icom at mailman.qth.net>
>To: ICOM Reflector <icom at mailman.qth.net>
>Subject: Re: [ICOM] ICOM HM-56 Mic. Stuck on Xmit
>Date: Sun, 20 Nov 2005 07:46:52 -0800
>
>Hi Kent,
>
>I would appreciate a copy of the schematic, if possible.
>
>cheers, Paul
>
>KENT HUFFORD wrote:
>>No, when I disconnect the mic. Or use another mic. The radio works fine.
>>
>>I have also received a nice schematic for the mic.
>>
>>Kent
>>
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
>>On
>>Behalf Of Lawrence Young
>>Sent: Sunday, November 20, 2005 12:03 AM
>>To: icom at mailman.qth.net
>>Subject: Re: [ICOM] ICOM HM-56 Mic. Stuck on Xmit
>>
>>
>>Does the radio continue to transmit with the mic removed? does the rig 
>>have
>>a mox(manual transmit button) that might be engaged?
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
>>Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>>
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>
>--
>----------------------------------------------------------------
>cheers, Paul - VA7NT - email: va7nt at telus.net
>
>"Those who hear not the music, think the dancers mad."
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/