[ICOM] cable connector

[Ralph K5JN]

Julio,
 
I know what you are thinking of...those are the 3 smaller output connectors on the back of the supply?
I guess I didn't make it clear that what I am looking for is the actual black cable clamp that is on the back wall of the PS30 and secures the main output cable to the back wall of the supply.
I am also looking for the connectors you speak of and will let you know if I find any.
 
73's Ralph
K5JN

Julio Peralta <jperalta at tampabay.rr.com> wrote:
I think you're talking about the Molex type connector that plugs into
the back of the radio. If you find any exact match for the Icom plugs
please advise the group. I've recently had some issues with the after
market cables that are available at hamfests and would like to find a
supplier of the exact Molex pins Icom uses.

Julio, W4HY 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Ralph K5JN
Sent: Tuesday, November 01, 2005 8:37 AM
To: Icom mail list
Subject: [ICOM] cable connector


Does anyone have or know where to buy the power output cable connector
for the Icom PS30 supply? 
It's also used on the IC2KL cables. 
I'm adding a cable to my PS30 and need one.
It's identified with the letters NK and NC-1.
Google searches have been no help.
I've seen ones that will work but want to stay original.
There was an option cable for the PS30 (OPC-045) no longer available
that may have provided the cable connector. 
If anyone has one or the other, please let me know.

73's Ralph
K5JN

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/