[ICOM] Icom PW1 SWR Metering Failure

[Bruce J. Howes]

Hi Mike,

Yes, by all means please post.
If I can do it, have worked with SMD before, saves the trip back to Icom.

73 Bruce W1UJR 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Mike Mellinger WA0SXV
Sent: Monday, May 30, 2005 7:00 AM
To: 'ICOM Reflector'
Subject: RE: [ICOM] Icom PW1 SWR Metering Failure

There was a batch of amps around s/n 1125 that had a defective resistor in
the SWR metering circuit.  Apparently it was damaged during manufacturing
and over time it failed.  If this sounds like your amp I'll get into my
files and see if I can't find the pictures of the fix.  Resistor costs
something like 27 cents from Icom but is pretty small so you might or might
not be comfortable replacing it.

73,
Mike WA0SXV


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Bruce J. Howes
Sent: Monday, May 30, 2005 03:49
To: 'ICOM Reflector'
Subject: [ICOM] Icom PW1 SWR Metering Failure

Anyone experienced a failure with the SWR metering function on the PW1?
The meter works fine on the ALC and voltage settings but will not read on
SWR.
The PW1 tunes and functions as normal but just does not display SWR.
Tried other antennas which clearly had a mismatch, without the tuner, and it
does not read.
 
Any suggestions?
 
Tnx.
 
73 Bruce W1UJR




----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/