[ICOM] IC-756 pro Po Light

[John Webb]

I just checked mine and it does the same thing.The vertical bar comes on on 
ant2 not 1 or 1/r.I think this is a normal.BUT,I have opened up mine for 
mars..This might not be normal for a rig that has not been opened up.I don't 
know.There is no band edge beep when opened up,.I see the same thing as you 
on my pro,I believe this is normal..73,john
----- Original Message ----- 
From: "JV" <kt4u at adelphia.net>
To: "Z Icom" <icom at mailman.qth.net>
Sent: Friday, May 13, 2005 11:51 AM
Subject: Fw: Re: [ICOM] IC-756 pro Po Light


> Hi John
> Let me to rephrase, hi hi. All the LEDs come on except the Po even when
> doing a cycle.
> BTW, the ant 1 LED does not come in 1 or 1/R mode. Ant 2 is OK. This has
> been so since I purchased the radio.
> JV
>
> -------Original Message-------
>
> That is a normal condition.The led you are refering to is the vertical
> mark.It is normal.As you switch from po to swr,alc etc..it is visible,73
> john
> ----- Original Message -----
>
>
>> Just noticed that the Po led on the meter switch is not on. The leds
>> ALC
>> SWR and Comp are OK. Anyone else have this problem and if so what is the
>> fix.
>> JV
>>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005