[ICOM] IC-756 pro Po Light

[Gerard L Krul.]

Right Adam...... for JV you will find the story on page 36 of the manual.
Regards.
Gerry.
----- Original Message ----- 
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Friday, May 13, 2005 11:25 AM
Subject: RE: [ICOM] IC-756 pro Po Light


> JV, Gerry,
>
> The LED is off when the softkey is set to the default value (in this case 
> Po
> for the [METER] key.) It is lit when any non-default value is selected. 
> This
> is normal for all 756Pro-series models.
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
> On
> Behalf Of Gerard L Krul.
> Sent: 13 May 2005 10:10
> To: ICOM Reflector
> Subject: Re: [ICOM] IC-756 pro Po Light
>
> JV.
> Same on my PRO II, that's the way it suppose to be.
> Regards, Gerry ve6wg.
> ----- Original Message -----
> From: "JV" <kt4u at adelphia.net>
> To: "Z Icom" <icom at mailman.qth.net>
> Sent: Friday, May 13, 2005 10:20 AM
> Subject: [ICOM] IC-756 pro Po Light
>
>
>>    Just noticed that the Po led on the meter switch is not on. The leds
>> ALC
>> SWR and Comp  are OK. Anyone else have this problem and if so what is the
>> fix.
>> JV
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> Scanned by WinProxy
> http://www.Ositis.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>