[ICOM] Help: IC-02 Repair Question

[Clif Holland]

Has it been modified for out of band TX. If so then it needs to be brought 
back up to the ham bands. It's probably on 106.52..... IIRC

Clif Holland, KA5IPF
www.avvid.com


----- Original Message ----- 
From: <LeeCraner at aol.com>
To: <icom at mailman.qth.net>
Sent: Sunday, March 27, 2005 11:30 PM
Subject: [ICOM] Help: IC-02 Repair Question


> My IC-02 has stopped working.  Here are the symptoms:
>
> Only the right three frequency digits are displayed (e.g. 146.52 is 
> displayed
> 6.52).
> Pushing the PTT causes the display to flash.
> HT neither receives or transmits.
>
> I've tried resetting the CPU by both holding the function button while
> turning the HT on and by pressing the internal reset switch, both to no 
> avail.
>
> Any ideas?  Please respond directly to leecraner at aol.com.  Thanks in 
> advance
> for your help
>
> 73
> Lee WB6SSW
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/