[ICOM] IC-706 MKIIG Address number
Ken, WA2LBI
wa2lbi at frontiernet.net
Wed Jun 29 12:04:45 EDT 2005
Lou,
You can simply go to the SET MODE on your MkIIG and see what the address is.
A quick check of my MkIIG manual leaves me a bit confused. In the SET MODE
programming section it states "The IC-706MKIIGs address is 4EH". However, it
indicates the default address is 58H.
I am considering buying a N2VZ TurboTuner for a screwdriver and his installation
manual states the "CI-V Address needs to be set to 58H which is the default for
to 706 MKIIG".
I don't beleive it matters what address you select as long as the rig and PC
software us the same one and no other device on the bus has the same address.
Ken, WA2LBI
Quoting Lou Mecseri -KE1F <loumecseri at bestnetpc.com>:
> My CT-17 manual is not giving address number for IC-706MKIIG.
>
> I would appreciate this information.
>
> Are all the 706s use the same address numbers?
>
> 73s
>
> Lou KE1F
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
More information about the Icom
mailing list