[ICOM] Amp Keying Question Again

[Adam Farson]

Hi Joe,

I take it that the noisy relay to which you are referring is the T/R relay
in your L-7. The little reed relay in the 756Pro series is inaudible - at
least to me. In any event, there is no provision for disabling the reed
relay.

Incidentally, you can connect the ALC line to ACC (1) Pin 5. I believe the
L-7 ALC line is negative-going. The 756Pro series requires a negative-going
ALC voltage in the range 0 to -4V.

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of jduerbusch at charter.net
Sent: 20 June 2005 12:59
To: ICOM Reflector
Subject: Re: Re: [ICOM] Amp Keying Question Again

Hi Jim, dont know if you are the Jim Miller I know? Since you did not give
your callsign.

But I am not worried about the 'Wait' time.  Since the Drake L-7 is not QSK,
its a PTT - Transmit - Go to receive thing.

I just don't like to listen to the noisy relay!!

I will be retired in about 6 years or so, so will have time to burn too.

73 Joe K0BX


Scanned by WinProxy
http://www.Ositis.com/