[ICOM] ICOM marine/ham radios

[PA3DUV]

Jim,

Be shure to have the M710 modded in order to have it working in the HAM 
bands.
The mod consists of the following 2 items:

1: diode removal
2: change of firmware settings.

Cheers,
Dick Knol
PA3DUV



----- Original Message ----- 
From: "Jim Isbell, W5JAI" <jim.isbell at gmail.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, June 10, 2005 6:01 AM
Subject: Re: [ICOM] ICOM marine/ham radios


Do you know if the AH3 antenna tuner can be used instead of the AT-130
or AT-130E?

I have an IC-725 with an AH3 tuner and while it is modified so that it
can use the Marine frequencies I would rather be completely legal with
an IC-M710 and AT-130 so I am looking to trade the 725 for a 710 and
use the AH3 with it or in the alternative also trade the AH3 for a
AT-130 doing it as a package for the 710 and AT-130

Anyone out there interested?

On 6/9/05, Gary Fiber <gfiber at comcast.net> wrote:
> The M700TY had FSK RTTY and if I remember correctly CW capabilities.
>
> Gary K8IZ
>
>
> Gary Fiber K8IZ
> GROL PG-19-6691
> Washington State Resident
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>


-- 
Jim Isbell
"If you are not living on the edge, well then,
you are just taking up too much space."
W5JAI
UltraVan #257
1970 E-Type
1985 XJS
1982 XJ6
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/