[ICOM] IC-2AT BP3 battery pack

[Julio Peralta]

Dick I'm almost sure I've got what you want. I'm located in Tampa. Do
you ever get over this way?

Julio

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Richard Keller
Sent: Sunday, July 10, 2005 4:26 PM
To: icom at mailman.qth.net
Subject: [ICOM] IC-2AT BP3 battery pack

After all these years my 2AT quit. Found out that the battey
is good but no voltage on the pack plus contact. No
schematic for the pack charger circuit but traced the
voltage to the base of the switch transistor A1048 and it
stops there. Charger works. Voltage is fine at the end
terminals so trouble is definitely on the circuit board. My
guess is the A1048 transistor (good logic, huh?!) and cannot
find a x-ref other than NTE2036 which Mouser says "not
found" so who has an idea?

A copy of the schematic would help. If anyone has a BP3 pack
with dead batteries I would purchase the pack for the
circuit board if price is reasonable.
73, Dick KF4NS
St. Petersburg, FL 33714 USA
Keep the glow!

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/