[ICOM] Icom IC-756PRO PSK31 connections

[Mort Arditti]

John,

Thank you for the information.
I use PSpice schematic capture which eventually became Orcad and after that
became Cadence. Orcad may have some extra 'goodies' for drawing schematics.
Again, thank you.
Mort
----- Original Message ----- 
From: "JohnD" <wm7a at cox.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, January 25, 2005 4:10 PM
Subject: RE: [ICOM] Icom IC-756PRO PSK31 connections


> Mort,
>
> I used Orcad Capture.  It was a free demo with limited capabilities. You 
> can
> try getting it from  http://www.orcad.com/download.orcaddemo.aspx
>
> John DeRuiter, WM7A
> http://members.cox.net/wm7a/
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]On Behalf Of Mort Arditti
> Sent: Tuesday, January 25, 2005 2:55 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] Icom IC-756PRO PSK31 connections
>
>
> John,
>
> What program did you use to draw the interface schematic?
> I use the schematic portion from PSpice which works fine. However,
> it is nice to look at other options as well.
>
> Thank you,
>
> Mort, KB6BSN
> ----- Original Message -----
> From: "JohnD" <wm7a at cox.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Tuesday, January 25, 2005 1:34 PM
> Subject: RE: [ICOM] Icom IC-756PRO PSK31 connections
>
>
>> Vic,
>>
>> Here is the one that I designed and built for myself. It includes CW, 
>> RTTY
>> and PTT in addition to the audio interfaces. Just use what you want. Note
>> that all circuits are isolated, i.e. the computer ground is isolated from
>> the radio ground using the transformers and optocouplers. The 
>> transformers
>> are 600 ohm 1:1 Mouser 42TL016.
>>
>> http://members.cox.net/wm7a/Images/Data%20Interface.jpg
>>
>> John DeRuiter, WM7A
>> http://members.cox.net/wm7a/
>>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net
>> [mailto:icom-bounces at mailman.qth.net]On Behalf Of Vic, CT1AXS
>> Sent: Tuesday, January 25, 2005 1:30 PM
>> To: icom at mailman.qth.net
>> Subject: [ICOM] Icom IC-756PRO PSK31 connections
>>
>>
>> Hi all,
>>
>> I would like to connect my PRO to a sound card to work PSK31.
>> I already have the CI-V interface (home made) that is working
>> very well, so PTT will be made by him and the PSK31 software.
>> Where can i get the schematics fro the connections?
>> A simple but good interface will be welcome.
>> Tnx in advance.
>>
>> Vic
>>
>> --
>> 73 de CT1AXS
>> _________________________________________________
>>            www.qsl.net/ct1axs
>>    Distribuidor SWISSLOG para CT e Ilhas
>> Downloads em www.portuguese.icap.ch
>>   email: ct1axs at sapo.pt ou ct1axs at qsl.net
>> _________________________________________________
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Win a new Icom IC-756 PRO III and help QSL/QTH.net
>> Details at: http://mailman.qth.net/
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Win a new Icom IC-756 PRO III and help QSL/QTH.net
>> Details at: http://mailman.qth.net/
>>
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>
>