[ICOM] Net Meeting issues

[Edward L. Dowdy]

I had this problem with my Kenwood TS-480. I was feeding audio through the 
mic input. PTT was via the com port on the rig. Anytime I initiated PTT via 
the com port it cut the mic audio off. I use VOX for the time being, till I 
rewire it to the data port. It's been a while since I had a PROII. Not sure 
if it is the same. It's something to look at though. I miss the PROII. 
Didn't know there was a way to control it via the internet. I guess I'll 
need to save my nickels to get another one.

73,
Ed KA9EES

----- Original Message ----- 
From: "John King" <k5pgw at yahoo.com>
To: <Icom at mailman.qth.net>
Sent: Thursday, December 22, 2005 3:23 PM
Subject: [ICOM] Net Meeting issues


> Any Net Meeting Guhrus out there?
>
> I am using Net Meeting program to allow me to control
> my Host computer (one controlling my icom 718). I am
> using N4PY's GREAT software to control the Icom with
> the host computer.
>
> I am able to control the Host computer and Icom 718
> remotely from my laptop. ALL IS WORKING WELL TO THAT
> POINT.......BUT............. I am getting no audio
> from host computer to the remote computer using Net
> Meeting.
>
> I am using a BUXCOM RASCAL to pipe audio to and from
> host computer from the Icom 718.
>
> Has anyone had experience with this type operation
> using Net Meeting and communicating with audio between
> two computers? Do you have any ideas why I am not able
> to send and receive audio to and from the remote
> computer? I have checked for audio out of the RASCAL
> with headphones and there is audio going into the
> soundcard of the Host computer from the icom 718.
>
> HELP!!!HELP!!!HELP!!! Thanks and 73, John, K5PGW
>
>
>
>
>
> __________________________________
> Yahoo! for Good - Make a difference this year.
> http://brand.yahoo.com/cybergivingweek2005/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/