[ICOM] Icom 730 ex202

[Frank A. Ellis]

Sam,

The LDA Unit provides bandswitching voltage via the
external 24-pin connector for accessories such as an
antenna tuner (AT-100/500) and/or the IC-2KL
Amplifier. It is a very tough to find option unit.
Operation with an AT-series antenna tuner and/or
IC-2KL must be performed in manual mode, when the LDA
Unit is not fitted.

When the FL-30 is removed, the P3 jumper on the 2nd IF
Unit must be relocated from J8 (PBT) to J7 (IF Shift).
This is covered in the operator's manual, under
Options Installation.

No actions are required when removing the FL-45, this
renders the CW Mode inoperative when the mode switch
is placed in CW-N, which is normal, and the way the
rig operates in the stock configuration.

73 Frank W3UHF





--- Sam Effinger <k9sd at ezl.com> wrote:

> I have an Icom 730 with the EX202 LDA option...What
> is it and what does it do ?? also can I remove the
> fl30 ssb filter and the fl-45 cw filter without
> replacing it with anything else ??
> 
> Thanks for the time..
> 
> Sam  K9SD
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 



		
__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com