[ICOM] IC-765 Advice needed

[Dave Meitzen]

Thanks
Dave

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Don
Sent: Thursday, December 22, 2005 12:10 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] IC-765 Advice needed


Hi Dave,

If the problem is only on one mode (USB, etc.) then the BFO
caps may be the problem.

Don
ve3hur

On Wed Dec 21 18:24:28 2005 dmeitzen at comcast.net (Dave Meitzen) wrote:
>
> I just replaced the PLL caps and aligned the voltage as described to 6.5
> volts using a scope.
>
> The transceiver still seems to be off freq about 1.2 KHz. like it was
before
> I replaced the caps. (the off freq problem happened over night a couple
> weeks ago. I may not have fixed the problem? Using the marker and
> calibration compensates some but not all the off frequency. Example if I
am
> on 3925 people hear me low about 1.2K
>
> Recommendations?
> Thanks
> Dave
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/