[ICOM] IC-765 Advice needed

[Dave Meitzen]

Will do!
Thanks
Dave

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Frank A. Ellis
Sent: Wednesday, December 21, 2005 7:27 PM
To: ICOM Reflector
Subject: Re: [ICOM] IC-765 Advice needed


Dave,

The PLL capacitors have nothing to do with frequency
alignment or accuracy. They simply keep the VCO in the
center of the locking range. 

Align the reference oscillator, DDS clock, BFO's and
PBT per the service manual and the rig will be right
on.

73 Frank W3UHF





--- Dave Meitzen <dmeitzen at comcast.net> wrote:

> I just replaced the PLL caps and aligned the voltage
> as described to 6.5
> volts using a scope.
> 
> The transceiver still seems to be off freq about 1.2
> KHz. like it was before
> I replaced the caps. (the off freq problem happened
> over night a couple
> weeks ago. I may not have fixed the problem? Using
> the marker and
> calibration compensates some but not all the off
> frequency. Example if I am
> on 3925 people hear me low about 1.2K
> 
> Recommendations?
> Thanks
> Dave
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/