[ICOM] IC-706
Denis O' Flynn
ei6hb at eircom.net
Sun Dec 18 10:13:45 EST 2005
Paul
Makr sure your MARK is right on MTTY = mine is 2125
Denis
EI6HB
----- Original Message -----
From: "Paul Meyers" <pjmeyers at hotmail.com>
To: <icom at mailman.qth.net>
Sent: Saturday, December 17, 2005 9:09 PM
Subject: Re: [ICOM] IC-706
>
> WriteLog 10.52F, MTTY, FSK and CI-V rig control.
>
> Paul
>
> N2OPW
> ______________________________________________________________
>
> From: "Denis O' Flynn" <ei6hb at eircom.net>
> Reply-To: ICOM Reflector <icom at mailman.qth.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Subject: Re: [ICOM] IC-706
> Date: Sat, 17 Dec 2005 20:20:22 -0000
> >What software are you using??
> >
> >de Denis
> >EI6HB
> >
> >----- Original Message ----- From: "Paul Meyers"
> ><pjmeyers at hotmail.com>
> >To: <icom at mailman.qth.net>
> >Sent: Saturday, December 17, 2005 8:00 PM
> >Subject: [ICOM] IC-706
> >
> >
> >>
> >> I have a IC-706 origional. During the OK RTTY contest I
> >>determined
> >> (complaints from others that I was off frequency) that I was
> >>listening
> >> 150Hz up from where the radio was transmitting. In SSB
> or
> >>CW you
> >> probably would't even notice this but I did in RTTY and it
> >>probably it
> >> would be very noticeable in PSK 31.
> >>
> >> I temporarly "solved" the problem by runnung a "mini" split,
> >>but not
> >> telling anyone. Easy to do for running but, time consuming for
> >>S&P.
> >>
> >> Has anyone ever seen this before? Is there an adjustment for
> >>this?
> >>
> >> Paul
> >> N2OPW
> >>----
> >>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> >>Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >>Icom FAQ: http://www.qsl.net/icom/
> >>
> >----
> >Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> >Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >Icom FAQ: http://www.qsl.net/icom/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
More information about the Icom
mailing list