[ICOM] re:IC761 on PSK

[Jerry bishop]

Hi Should be 1 sliders on the rec -mine says balance,side and 2 on the tx 
side- vol and the one next to it.Using a SB PCI 16 card .Later,Jerry W8KQ
----- Original Message ----- 
From: "zl3kr" <zl3kr at ihug.co.nz>
To: "Icom" <icom at mailman.qth.net>
Sent: Wednesday, December 07, 2005 2:24 PM
Subject: [ICOM] re:IC761 on PSK


> Many thanks for all the comments.
> I have the IC761 cable that came with the Rascal so that should
> be ok.
> I have the Audio card volume at "full"
> I have the rascal gain set at Max.
> Without Speech processor on max out put is about 8 to 9 watts.
> With Speech processor in can full drive to about 55 watts
> but keep it down to about 30 to 35 watts, and from all reports does not 
> appear to be causing a problem, I guess I will have to go with it as it is
> Alan ZL3KR
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/