[ICOM] CI-V

[KE5CTY Bob]

Ok I have the CT-17 set up with logger32 and N1MM and all
is well with my single rig IC-728 setup with transceiver
disabled (works great).

The question I have now is:

After I set up logger and N1MM
for multiple radios
using the CI-V controller:

Example:
Rig 1 = 160-10
Rig 2 = 2/440
Rig 3 = 6 Mtrs
Rig 4 = reserve for second IC-728 and SO2R

When I click on the band map and it begins it's polling
for the frequency selected for the spot - Does logger and
N1MM (thru the CI-V controller) find the correct radio for
the frequency automatically or is there something special
that I have to do other than set up the rest of the rigs
the same way I did the IC-728?

73 fer nw,
Bob
KE5CTY (old calls WB5ZQU - WY5L)
10X# 37210, FP#-1141, SMIRK#-5177
http://www.qsl.net/ke5cty/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.