[ICOM] CW on ICOM IC756 Pro II

[Tony Lord]

Hi Frank,

No it isn't BUT I realised now that I had in error switched off the
semi/full break in! With that switched on I can key CW now!!!

There is one born every day !!!!

73's de Tony G8DQZ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Frank A. Ellis
Sent: 28 April 2005 12:03
To: ICOM Reflector
Subject: Re: [ICOM] CW on ICOM IC756 Pro II

Tony,

Is VOX on?

73 Frank W3UHF


--- Tony Lord <tony.lord at lfpuk.co.uk> wrote:
> 
> 
> Hi all, I am sure there is a simple explanation and
> I have done something
> wrong. When I switch to CW mode and tap the CW key
> (straight type), I can
> hear the tone but the rig doesn't transmit. If I set
> the rig to transmit it
> will key then. I have adjusted the set function to
> "straight key" and it all
> worked before. Now I must have messed up something
> and I cannot think what
> it is/was. Any ideas??
>  
> Thanks 73's de Tony G8DQZ
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/