[ICOM] CI-V "transceiver" mode?

[Joe - WDØM]

Hi Mike,

I found the old 765 manual - it does do transceive, and the switch is on 
the inside of the bottom case.

73 and GL with your project,

Joe
WDØM

At 08:53 AM 4/27/2005, you wrote:
>Thank you Joe,
>
>After some research this morning, I've determined the following radios 
>provide "transceiver mode" frequency record broadcasts;
>
>IC-703
>IC-706, '706MKII, '706MKIIG
>IC-718
>IC-746, '746PRO
>IC-756, '756PRO, '756PROII, '756PROIII
>IC-775dsp
>IC-78
>IC-7800
>
>It seems the IC-751 is not CI-V capable?  And I'm lookin' at the IC-736 / 
>IC-738 manual now...
>
>I haven't found manuals yet for the IC-765...
>Very 73, Mike - K8LH
>
>Joe - WDØM wrote:
>
>>My 756 Pro does, and if I recall correctly, my old 765 did as well, and 
>>was changed with a DIP switch. inside the rig.
>>
>>73,
>>Joe
>>WDØM
>>
>>At 05:22 AM 4/27/2005, Mike - K8LH wrote:
>>
>>>Gentlemen,
>>>
>>>Do you know which Icom radios support the CI-V "transceiver" mode?
>>>This mode on my PROII provides CI-V frequency record broadcasts when I 
>>>change frequency or bands and I'm using it to decode band data for a 
>>>miniature PIC based antenna controller...  I'm wondering if it may be 
>>>useful to others and if I need to add 'smarts' to the controller for 
>>>other Icom radios if this "transceiver" mode is not available...
>>>
>>>Thank you for your time and kind consideration guys...
>>>
>>>Regards, Mike - K8LH (Westland, MI)
>>>----
>>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>Icom FAQ: http://www.qsl.net/icom/
>>
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/