[ICOM] IC910h

[BOBJ]

  Hi Edgar ,
 Thanks for getting back to me . Are you letting the automatic rf switching 
do the work on the mirage preamp ? Also have you ever used the send output 
(grd)on acc1 pin3 to switch a mirage preamp ?
  My reason for asking is I had to send the mirage 2m/kp1 back to mirage and 
I think I might have got the GaAs-FET .I'll find out .
  Also what antenna are you using on 70 CM .
                                  BOBJ
----- Original Message ----- 
From: "Edgar Brown, N6OU" <yungthor at comcast.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Thursday, September 30, 2004 12:39 PM
Subject: RE: [ICOM] IC910h


> Hi Bob,
> The ACC1 connector is a standard DIN connector. Just pick up an eight pin
> DIN male from Radio Shack or your local electronics emporium.  I have an
> Icom 2 meter mast mount preamp and a KLM/Mirage 70 cm mast mount preamp.
> Fire away
> Edgar
>
> -----Original Message-----
> Behalf Of BOBJ
> Sent: Thursday, September 30, 2004 8:31 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] IC910h
>
>    Hi the name is Bob . I have a question concerning the  ACC1 . I need 
> the
> male half so I can use it
> about such a part .
>   Also I would like to know someone who has used a mirage 2m or 432 preamp
> with this radio . I have some questions to ask of a person currently doing
> this .
>   Any help would be appreciated .
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/