[ICOM] Mic wiring required HM-14

[Reed Park]

Gary Fiber wrote:

> If I am wrong others here will correct me.
>
> White - Pin 1 Mic Audio
> Black - Pin 3 Freq UP / Down
> Red    - Pin 5 PTT
> Green - Pin 6 Ground
> Shield - Pin 7 Mic audio ground
>
> Pins 2 ( 8 volts ), 4 ( squelch Switch ) ,and 8 ( Receiver Audio ) are
> empty on the HM-14 mic connector.
>
> Gary K8IZ

Hi Gary

Many thanks for the reply. Looks like I fell into that old trap of I assumed.
I assumed the 8 volts was on pin 2 like it is on my IC-751. I was hoping
that ICOM mics were wired the same, no matter if they were HF or VHF.
Will wire it up as you suggested and give it a try.

What can I loose, it's not my mic.    heh heh heh

7 3
Reed

--


Looking for information on

     Marconi SMR-3
     Marconi MSL-5 and
     Northern Electric R8119A receivers of WW 2.

     ARROW Research (Avro CF-105)
     Reed Park
     252 Gauvin Road
     Dieppe, New Brunswick
     Canada E1A1M1

     Amateur Radio V E 1 N U
     WW II, # 19 SET user
     Paraset replica builder and owner of a real one.