[ICOM] IC V8000 handmike

[JohnD]

Mine was the switch. I measured the switch itself.

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Rick Robinson
Sent: Thursday, September 23, 2004 3:55 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC V8000 handmike


I fixed one for a friend a while back. I really don't think it is the
switch. A bad solder connection was the problem with his. Reflow the solder
on the ptt switch connections. Let us know if this works for you. GL, Rick.
----- Original Message ----- 
From: "Ed Yeary" <w4tey at bellsouth.net>
To: <Icom at mailman.qth.net>
Sent: Thursday, September 23, 2004 12:03 AM
Subject: [ICOM] IC V8000 handmike


Anybody have any trouble with the HM 133?  I have to squeeze mine like I
have my hands around Bin Ladens neck to make it transmit!. And thats pretty
darn hard!
Ed Yeary W4TEY
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/