[ICOM] CW Pitch Control on the PROII

[n4lq]

Yes and you can toggle between cw and cw reverse, tuning the vfo for 
equal pitches in either mode inorder to assure you are zero beat with the 
other station. I am wondering if the PRO3 has any better cw audio than 
the pro2. The pro2 is good but a bit harsh and the agc tends to be a bit 
thumpy, no matter what the agc speed is set for. Sounds almost like 
overshoot. 

-----Original Message-----
From: "k0bx at qsl.net" <k0bx at yahoo.com>
To: icom at mailman.qth.net
Date: Thu, 16 Sep 2004 08:41:36 -0700 (PDT)
Subject: [ICOM] CW Pitch Control on the PROIII

> I know we had a few discussions on this topic on the
> PROII but I was looking at the PROIII manual, page 36
> and find that in the "Filter Set Mode" screen it
> graphically displays the CW pitch operation.
> 
> In other words, since I like a higher note, I can set
> it to 850hz using the graphic display.  This sets the
> xmit/receive.  So the note will be centered in the
> filter and I should be coming back right on the other
> guy freq, plus or minus my tin ear.
> 
> Joe K0BX
> 
> 
> 
> 		
> _______________________________
> Do you Yahoo!?
> Declare Yourself - Register online to vote today!
> http://vote.yahoo.com
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>