[ICOM] Icom 2100H cable stuck

[Sheldon Daitch]

You might have to carefully use a needle nose pliers and
squeeze the tab down, closer to the radio panel.  You might 
be able to accomplish the same with a very small flat
screwdriver.

If there is too much angle on the tab, you can push it down
at the normal point, but the catch won't clear the tab in
the jack housing.

Sheldon

W4ABW at aol.com wrote:
> 
> Hope not too much off-topic. I plugged an MFJ radio/packet cable 'tween my
> TNC and the Icom 2100H radio modular mic connector. All ok, but now it won't
> pull out. I squeeze the lil tab but its locked. Anyone else ever have this kinky
> problem ?
> 
> Al
> W4ABW
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/