[ICOM] SSB problems ICOM 706 MKII

[Rick Robinson]

Cliff, you can adjust the carrier frequency in the quick set menu on a
MK2.Item Q4 in the quick set mode. I have had a MK2 and currently own two
MK2G's and you can adjust the carrier frequency in the quick set menu.-200hz
to +200hz. I was not infering to adjust the oscillators, just the carrier
frequency via menu adjustment.This will affect the resulting audio. Rick.
----- Original Message ----- 
From: "Clif Holland" <clif at avvid.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, September 07, 2004 9:43 AM
Subject: Re: [ICOM] SSB problems ICOM 706 MKII


> The only adjustment for the carrier oscillators is in the service menu
under
> "Filter Calibrate". It only requires a dummy load.
>
> First though try a full reset and see if it helps. Hold down the band up
and
> band down buttons and turn on the radio. It should do a reset.
>
> Clif Holland, KA5IPF
> www.avvid.com
>
>
> ----- Original Message ----- 
> From: "Don and Diana Cunningham" <wb5hak at sirinet.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Tuesday, September 07, 2004 7:19 AM
> Subject: Re: [ICOM] SSB problems ICOM 706 MKII
>
>
> > Rick,
> > Would you mind telling us how to do a "full CPU reset"??  A 15mb
download
> > to get the service manual on my SLOOOOW 24k country dialup is a major
time
> > investment, hi.  Hopefully will be able to get wireless higher speed
soon.
> > Ma Bell can't get it done out here.  Tks!
> > 73,
> > Don, WB5HAK
> > ----- Original Message ----- 
> > From: "Rick Robinson" <k8dxn at charter.net>
> > To: "ICOM Reflector" <icom at mailman.qth.net>
> > Sent: Tuesday, September 07, 2004 7:11 AM
> > Subject: Re: [ICOM] SSB problems ICOM 706 MKII
> >
> >
> >> Check the carrier offset in each mode in the quick set menu. Adjust it
to
> >> zero. Do this on  HF, 6 and 2 meters. If no improvement or it is
already
> >> set
> >> to zero then do a full CPU reset. The radios brains might be mixed up.
> >> Try
> >> this before doing hardware adjustments. These things happen sometimes
and
> >> can give false impressions. Good luck, Rick.  K8DXN
> >>
> >>
> >> ----
> >> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> >> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >>
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/