[ICOM] FS: IC-765 Front Panel

[David Hammond]

Hi Everyone,

Does anyone want to freshen up an IC-765 front?

I have a near-new front panel for sale.  It is in 9.8 condition with no 
scratches, finger wear, or smudges on the silk screening or the front panel. 
The only blemish is a small scratch on the bottom apron of the panel that is 
invisible unless the radio is upside down. All else is perfect. This is the 
panel you stare at for hours at time and they all usually take a beating as 
times marches on.  This one did not.

I am also including a near perfect clear plastic display window and the 
"IC-765 Icom Label" which is the trim piece at the bottom of the clear 
plastic display window that covers up the three small screws that hold the 
display cover in place. You will need to reuse your own screws. I have no 
extras here.

The label is held in place by self adhering tape and can be refreshed by 
using double stick scotch tape.  The old label is removed by heating the 
front panel with a hair dryer and using a dental pick to start a lift in a 
corner of the label at one end. Works flawlessly.

I was planning to use these on a second IC-765 that never happened here.

When available, Icom America parts charged $123 for the panel, $60 for the 
display window and $15 for the label trim for these three parts. I will sell 
them for as  single group for $125.00 shipped ground in the USA.

Please e-mail me with your questions or interest to dhhdeh at concentric.net

73 de N1LQ
Dave