[ICOM] Re: 756_PRO_ACC1_JACK

[Clif Holland]

I have no personal experience with the DIN jacks on the 756.

BUT the RS din plugs when used with a Kenwood are a NO-NO. The pins are just 
enough bigger and the alignment just enough off that they will not plug in 
just right and when forced in will break the socket.

Forewarned....

Clif Holland, KA5IPF
www.avvid.com


----- Original Message ----- 
From: "Ed Parish K1EP" <k1ep at arrl.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, October 21, 2004 1:12 PM
Subject: [ICOM] Re: 756_PRO_ACC1_JACK


>I just bought one at the local Radio Shack for $0.48.  They are on 
>clearance, which makes the price $0.97, but all parts in the drawers are 
>50% off this month.
>
> At 10/19/2004 06:28 PM, you wrote:
>>Can anyone point me to the Mouser part number of the plug used to mate 
>>with the Icom 756PROII accessory one jack?
>>I need to order a couple of these and 1/2 hour on the Mouser WEB site 
>>hasn't gotten me anywhere.
>>Why re-invent the wheel? Has anyone been there, done that?
>>Thanks
>>George
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>