[ICOM] Flickering display - 756 Pro

[Joe - WDØM]

A very reasonable thought.  But why would it suddenly start without any 
changes in configuration after all this time?  I have toroids on the keying 
line....still happens.  RF feedback was one of my suspicions....and it may 
still be finding a way into it that I have yet to find.

73,
Joe
WDØM

At 10:48 AM 10/17/2004, N0KHQ at aol.com wrote:
>RF is getting into the Pro.
>
>Probably through the keying line. RS sells snap on toroids that you can  use,
>wrap as many turns of the keying line around the toriod as you can.
>
>A ground rod is good for DC or AC grounding, but helps very little for RF
>grounding.
>
>
>73
>John / N0KHQ / St. Louis
>
>Always on  18.130
>
>Antennas:
>
>You can build 'em better than you can buy  'em
>Please visit the sites below:
>_http://www.hamuniverse.com/antennas.html_ (http://www.hamuniverse.com/)
>_http://www.cebik.com/n0khq.html_ (http://cebik.com/nokhq/html)
>
>
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/