[ICOM] 756pro-ii - what batch ?

[MikeR]

Elan -
I'll have to respectfull disagree with you that there is a wide spread 
problem with the rig overheating. My PRO II runs hotter than I think it 
should, but I have not personally experienced, nor have I seen here on the 
reflector, a failure caused by overheating. My SN is in the 0003xxx range.
73, Mike NF4L

----- Original Message ----- 
From: <G0uut at aol.com>
To: <icom at mailman.qth.net>
Sent: Wednesday, October 13, 2004 12:06 PM
Subject: Re: [ICOM] 756pro-ii - what batch ?


> Hello Issac
> don't buy the proll to many problem on over heating ask 4x4bl he have as
> well many problem
> i have the original pro that much much better never get hot.
> no if you are looking to buy pro go for the prolll the new one a friend in
> JAPAN said that most problem sort out and better i had x2 pro ll and sold 
> them.
> look at my station picture in qrz .
>
> all  the best for now
> vy 73
> Elan
> G0uut/Dl9fcc/4Z4UN
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>