[ICOM] PR 780 Microphone

[JohnD]

Then again, it is also targeted for the less expensive 756Pro and 746pro.

John DeRuiter, WM7A
http://members.cox.net/wm7a/

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Bill NY9H
Sent: Monday, November 29, 2004 10:04 AM
To: ICOM Reflector; ICOM Reflector
Cc: jim Brown
Subject: RE: [ICOM] PR 780 Microphone


Nahhh,,,

Bob can do the math,,,,  if you will spend 10 k on a radio ....
you'll be happy with 400$ for the mic,,,
let's do the math ....a  $ .50 electret ,,,plus a $1.25 dynamic element,
and an expensive enclosure,,,and the 'classic' stand.
.
Bob should have had his vendors provide a big yoke like the Yaesu has... it
would look cooler,,,,,

bill

At 10:44 AM 11/29/2004, JohnD wrote:

>I heard it on the ICOM net the other week. Sounds very good.  It is also
>interesting that both elements can be enabled at the same time as well as
>separately. Does anyone know what the approximate cost will be? I am
>guessing it will be around $200.
>
>John DeRuiter, WM7A
>http://members.cox.net/wm7a/
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net
>[mailto:icom-bounces at mailman.qth.net]On Behalf Of Woody
>Sent: Sunday, November 28, 2004 11:51 PM
>To: Icom List
>Subject: [ICOM] PR 780 Microphone
>
>
>I may have missed it if someone has written about the new Heil PR-780
>microphone on the list before, but while looking for some parts for a Heil
>mic on their website a few minutes ago, I noticed the announcement for Bob
>Heil's new PR-780 mic.
>
> >>>>
>"The wizards at Heil Sound have been working with ICOM AMERICA for nearly a
>year in the development of a very special microphone for a very special
>transceiver. The PR 780. A dual element, high quality studio microphone
with
>a very special wide frequency response dynamic element and, at the request
>of Dr. Inoue, the President of ICOM, the Heil PR 780 also has the world
>famous tailored response Heil HC element".
> >>>>>
>
>It is a great looking mic made specifically for the IC-7800 and the IC-745
&
>756 Pro series radios.
>
>Check out: http://www.heilsound.com/amateur/announcements.htm at the bottom
>of the page.
>
>73,
>
>Woody
>KJ4SO
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/