[ICOM] charger for T7H

[Gary Fiber]

At 09:16 AM 5/29/2004, you wrote:
>Ok gang I'm in need of info. I have a BC-119 desktop charger to charge my
>battery packs.
>I bought a AD-56A adapter and also had the AD-56B with it also thinking this
>would all work, but it don't.
>
>I'm finding out that I need a different circuit board for my charger,
>possibly a AD-75, has anybody had this same problem.
>
>Or can someone fill me in on maybe some info that I might not have.
>
>Thanks,
>Brian
>
>KA5BKG
The BC-119 is pretty universal. The basic charger came in two styles, one 
with and one without the  AD-75 I think. I forget the parts on the BC-119. 
The one without the adaptor board that mounting in the bottom was used for 
the newer batteries icom made. The T7H has been around since the BC-79 days 
so an adaptor board must be installed into the charger. For a while Icom 
produced 2 versions, one with and one without the adaptor board, purchased 
depending upon which battery you were going to use.

hope some of this helps.

Gary K8IZ









>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident