[ICOM] Heat problem on Pro ll ??

[Clif Holland]

I'm not familiar with that problem.

Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
----- Original Message ----- 
From: <awallacejr at sbcglobal.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, May 28, 2004 9:30 AM
Subject: Re: [ICOM] Heat problem on Pro ll ??


> Hi Cliff--
>
>
> Have you had any experience with 756 Pro ll's "heat locking up" and
refusing
> to work requiring repair work by Icom after being left in the receive
> position without transmitting for several hours?
>
> Thanks, Andy  K5VM
>
>
> ----- Original Message ----- 
> From: "Clif Holland" <clif at avvid.com>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Friday, May 28, 2004 9:10 AM
> Subject: Re: [ICOM] Selected bands on Pro ll
>
>
> > Send it to Icom before you void your warranty.
> >
> > Clif Holland, KA5IPF
> > AVVid
> > Authorized Kenwood and Icom Service Center
> > 816 W Shady Grove Rd
> > Irving, TX 75060
> >
> > www.avvid.com
> >
> > 1-800-214-5779
> > 972-870-0630 (Local)
> > ----- Original Message ----- 
> > From: "Mark Pride" <mpride at us.ibm.com>
> > To: <icom at mailman.qth.net>
> > Sent: Thursday, May 27, 2004 4:08 PM
> > Subject: [ICOM] Selected bands on Pro ll
> >
> >
> >
> >
> >
> >
> >
> > Clif,
> >
> > Appears you were right on with the VCO area.  VCO-A seems to be way down
> in
> > output voltage when on the lowest 3 bands (like .003 V vs. 1 to 3 volts
on
> > the other bands) when measured at LVA test point.  Given the very low
> > voltage, what might be the problem?  I tried adjusting C278 to vary the
> > voltage, but not much effect.
> >
> > What might the problem be?  I seem to be inching toward the shipping
> > department here to return it to ICOM.
> > Still hoping I can fix it myself!
> >
> > Regards,
> >
> > Mark, K1RX
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>